Resetter Printer Canon MP110

1)Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by presing <— or —> then OK
3) Enter CMY ink level by pressing <— or —> then OK
4) Select 1 by presing <— or —> then OK
5) Enter K ink level by presing —> then OK
6) select 1 by presing <— or —> then OK
7) Press reset ( design: // )
SERVICE MENU COUNTER ACCESSPRINT PAGE COUNT SCAN PAGE

Be the first to like this post.Tags: reset printer, Reset Printer Canon, resetter printer, resetter printer canon

This entry was posted on September 5, 2008 at 12:39 pm and is filed under Reset Printer Canon. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Read More..

Reset Waste Ink Counter Procedure for Canon Pixma MP110

To reset Canon Pixma MP110 printer there are two steps you have to do, that is enter to service mode then reset waste ink counter.

Here the complete steps to reset Printer Canon Pixma MP110:

Step 1. Enter Service Mode: 
Turn ON the printerPress these button in the following order correctly: MENU,SCAN,COPY,SCAN Step 2. Reset Waste Ink Counter Procedure for Canon Pixma MP110
Press right arrow untill "COUNTER ACCESS" appears then press OKPress right arrow untill "ABS-M DOT COUNT" appears then press COPY Set "ABS-M DOT COUNT" to 0 by pressing left arrow then press OKPress STOP/RESET to exit service mode. Once this procedure finished your printer should work normally.

Source

Read More..

Reset Waste Ink Counter Procedure for Canon Pixma MP110

To reset Canon Pixma MP110 printer there are two steps you have to do, that is enter to service mode then reset waste ink counter.

Here the complete steps to reset Printer Canon Pixma MP110:

Step 1. Enter Service Mode: 
Turn ON the printerPress these button in the following order correctly: MENU,SCAN,COPY,SCAN Step 2. Reset Waste Ink Counter Procedure for Canon Pixma MP110
Press right arrow untill "COUNTER ACCESS" appears then press OKPress right arrow untill "ABS-M DOT COUNT" appears then press COPY Set "ABS-M DOT COUNT" to 0 by pressing left arrow then press OKPress STOP/RESET to exit service mode. Once this procedure finished your printer should work normally.

Read More..