096-02 error is a problem with the finisher.Solution 1:
Check and clean the upper limit switch.
Solution 2:
Replace the upper limet switch
Solution 3:
Check the shift motor operation and finisher control PCB board. If the motor has failed, you need to replace it, and perhaps the control PCB too. More information click here
Solution 1:
check for foreign material or paper debris around the purge drive system unit;
- remove foreign material.
Solution 2:
check for foreign material or paper debris around the ASF unit;
- remove foreign material.Solution 3:
If other solution fail, replace one off the following part- Purge drive system unit
- Logic board. More information click here
Solution 1:
Disconnect the power cable from the printer.Wait 1 hour.Connect the power cable
Solution 2:
Check and Clean Head contact pin condition of the carriage unitCheck Cable connection especially the carriage FFC
Solution 3:
Solution 4:
Replace the power supply unit.
Solution 5:
More information click here
Solution 1:
Unplug power supply and plug back in.
Solution 2:
Check for no pieces of paper, no littles objetcs in the printers.
Solution 3:
Carefully clean the encoder strip. It's located behind the carriage that runs all the way from right to left
- Work directly with CSIC in Epson Stylus printers cartridges.
- Reset or rewrite any chip using special addon device.
- Freeze internal ink counters.
- Reset internal ink counters even with empty cartridges.
- Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
- Hot swapping of cartridges supported.
- Resetting of protection counter.
- More then 100 different Epson printers supported
The site: http://www.ssclg.com/epsone.shtml
Download the 4.30 version
Printers you can reset with SSC utility:
Epson Stylus ?olor 400/440/480 LPT/480SXU/580/600/640/660/670/680/777/740/760/ 800/850/860/880/900 / EM-900C/980/1160/1520/3000
C20 / C40 / CL-750/C41 / C42 / C43 / C44 / C45 / C46 / C47 / C48/C50/C60/C61
C62 /C63 / C64 /C65 / C66/C67 / C68 / D68/C70/C80/C82/C83 / C84/C85 / C86/C87
C88 / D88 and PE
Photo RX420 / RX425 / RX430 /RX500 / RX510/RX520/RX600 / RX610/RX620/RX700 CX3100 / CX3200/CX3500 / CX3600 / CX3650/CX3700/CX3800 / CX3810 / DX3800/CX4500 CX4600/CX4100 / CX4200 /CX4700 / CX4800/DX4200 / DX4800 /CX5100 / CX5200 /CX5300 / CX5400 CX6400 / CX6600 /CX6300 / CX6500 /CX7800 Photo /Photo EX /Photo 700 / IP-100/750 / PM-770C /780 / 790 /
PM-780C /810 / 820
Photo 820 /825 / 915/830 / 830U/870 / PM-875DC /R200 / R210/R220 / R230
R300 / R310 / Photo R320/R800 / PX-G900/R1800/R2400/890/PM-890C/PM-A700
PM-G720/PM-970C/895/ 785EPX
Photo 900 /925 / 935/ 950 / 960 / PM-950C/1200 / PM-3000C/1270 / PM-3300C/1280 / PM-3500C
Photo 1290/2000P/2100/2200 / PM-4000EPX/Pro 5000 / PM-5000C
Solution 1: “Secondary transfer voltage contact/release problem”
Some electric parts can cause the trouble: Transfer Roller Pressure Solenoid (SL2) Transfer Roller Pressure Position Detection Sensor (PC7) Engine Board (PWB-A)
Solution 2:
The problem come from the fuser. You have to replace it.EPL-N3000: C13S053017BA Aculaser C1100: 2090471Aculaser C1900: 2077368
General Printer Error 0x61011be5.
Appears on these printers: D7560, C309A, C5390, C6380, ...
Genraly it's a carriage jam or a printhead issue.
Solution 1: Do a reset of the printer to factory default settings
Verify that the unit is switched on. Disconnect the power cable from All-in-One and also from wall outlet.Wait a minute.Plug in the power cable to the printer and also to wall outlet.Unplug the power cable from the printer (with the printer powered on) and wait for 20 seconds.Then, press and hold "#" and "6" while plugging in the power cord.Release the buttons after connect power cord.
Solution 2:
Open the printer and wait for the carriage to slide overRemove the ink cartridges from the print head.With a cotton swabs dipped in hot water, clean gently the print head and each ink cartridge, until there is no ink residue coming off on the cotton swab.Once all is dry, replace the cartridgesDo a print test.If the error is still here: there are two possibilities:One of the ink cartridges is defective and causing the error
The print head will need to be replaced. (CN642A)
Solution 1:
Lift the scanner cover using the plastic tabs, located on the left and right side of the machine until it locks securely into the open position.Slide the print head to the middle.Check for any pieces of paper or staple , paper clip...
Solution 2:
Lift the scanner cover using the plastic tabs, located on the left and right side of the machine until it locks securely into the open position.Slide the print head over to the right side under the cover to make sure you clean the entire encoder strip. With the lint free cloth, firmly grab the encoder strip on both sides and rub the cloth down the strip from one end to the other (left to right then right to left) at least three times.
Solution 3:
the encoder strip which gives the printhead the position is out of place. You have to open the printer and reinsert the strip:
Genuine HP CN643A - CD868-30001 printhead for HP 920 - 920XL:
There are many things that can cause paper jams in HP printers, and diagnoses vary from one model to the next. In this article I will discuss some of the most common causes of printer jams and possible solutions. Where is the paper jamming? When you answer this question you are close to solving the problem.
1. If the printer will not pick up paper from tray two or three there are several causes. Try using a lower weight paper. HP does not recommend printing a higher weight than 20lbs from and tray but tray one. If this does not work the paper rollers probably need to be changed. These come with every maintenance kit, but most end users do not change them, they just change the fuser. If you do not have rollers available try cleaning them with a lint free cloth and wipe away any paper dust or other debris.
2. The paper is picked up from the tray but does not make it to the toner cartridge. Typically this is the paper feed assembly or the registration assembly. These are not easily replaced and I suggest consulting a professional.
3. The paper gets to the toner cartridge and then jams. Try replacing the toner cartridge. If you have a newer model printer (most HP models) check to make sure that the toner transfer bar is not stuck in an upright position. Check for debris. If there is debris in the paper path this can cause jamming. Debris can be a torn piece of paper, a stable or just a build up of paper dust. DO NOT touch the roller. It will hold the oil form your skin and cause print defects.
4. The paper enters the fuser, but gets jammed inside. Unfortunately, the fuser will probably have to be replaced, but check for any debris on the rollers before replacing. Also clean the paper path with a lint free cloth. DO NOT touch the rollers. They will hold the oil form your skin. This does not cover all possible causes, only the most common. Link
There are inkjet printers for every budget. At the low end, you can pay less than $50. At the high-end, you can pay several hundred dollars. However, the purchase price of an inkjet printer is not the best way to determine how good of a bargain you are getting.
The truth of the matter is, printer ink is not cheap. An inkjet cartridge for your $50 printer can cost you $30. That means that the cost of two inkjet cartridges will be more than the cost of your purchase price.
A much better way to determine if you are getting a bargain on your inkjet printer is to try to figure out what it will cost you over the period of one year. That means you have to add the cost of your inkjet cartridges to the purchase price of your printer. To give you an idea of your cost, here’s a simple way to estimate your cost.
First, look up how many pages you inkjet cartridge will print. Then, make a rough estimate of how many pages of print you print each week. Multiply your weekly estimate by 52 to get the total pages for the year. Finally, divide the total number of pages per year by the number of cartridges your printer is rated to print. This will tell you how many inkjet cartridges you will need to purchase in a year.
For example, suppose your ink cartridge prints 200 pages and you estimate you print 20 pages per week. That means you’d print 1040 pages in one year. If you divide 1040 pages by 200 pages, you’d have to buy 6 cartridges to cover your printing for one year. Now, how much does each cartridge cost? Multiply that by the number of cartridges you’ll need for one year and you have your answer. This simple exercise may surprise you. If an ink cartridge cost $30 each, you’ll spend $180 in one year on ink. If you only paid $50 for the printer, that’s over three times the cost of the printer.
If it cost you $180 to print 1040 pages and the printer costs $50, you’ll pay $230 for your one-year printer cost. That comes to 22.1 cents per page. Now do the same thing for a different printer and compare. You just might be surprised.
One more thing… go online and look at some reputable printer companies. There are several recommended on this site. Check out the cost of their discount inkjet cartridges. These are brand new ink cartridges that are guaranteed to be as good as the original ink cartridge. They just don’t have the “brand name” on the box. You’ll probably be able to cut your printing cost in half. Now, you can make an informed decision on your next inkjet printer. You’ll at least have an idea on how much it really costs. Link
The digital camera is not meant only for capturing images and storing them on the computer memory disks. The real effect comes from the hard copy of those fantastic images taken by the users, that is the printed photographs! In order to get the printer copy of the images a very important device necessary is the printer. The digital image printing requires a few numbers of components that comprises the total process of printing.
This discussion is thus primarily focused towards analyzing and understanding this whole experience of digital camera printers.Scrutinizing in some more detail, it can be observed that in digital photography some really good and fantastic one-trick-pony printers have filled up the market that are exclusively designed for the sake of printing digital camera photos. These printers are not for the purpose of printing everyday documents, simply because their cartridges and photo paper, that are sold together in single boxes, are not cheap and thereby economic for such purposes. Thus they are solely for the reason of getting the images into physical paper with a high degree of perfection and elevated quality. In these printers the ink and paper are by and large sold together in single boxes, and the average print costs to around 30 to 70 cents. However the biggest advantage remains that these printers themselves are inexpensive.
Looking at the advantages of these digital camera printers, the very first and the most significant one is that these printers do not require a computer for their functioning. They have the ability of printing directly from the digital camera, which enables the users to take and use them on the road too! A few examples of such great printers are Canon's Selphy DS700 and CP330; the Olympus P-10; Sony's FP30 and EX50; Epson's Picture Mate; and Hewlett-Packard's Photo smart 375. Some digital cameras nowadays enable the users to connect them directly to a PictBridge printer using a standard USB cable. And then obtain the printed photographs. Another loom is to include memory-card slots right on the printer as a result the users do not run down the camera's battery while printing.
The above discussion reveals almost all the rudimentary yet important information regarding the digital camera printers and it is expected that more and more users of the digital cameras would appreciate this fantastic device! Link
096-02 error is a problem with the finisher.Solution 1:
Check and clean the upper limit switch.
Solution 2:
Replace the upper limet switch
Solution 3:
Check the shift motor operation and finisher control PCB board. If the motor has failed, you need to replace it, and perhaps the control PCB too.
Solution 1: “Secondary transfer voltage contact/release problem”
Some electric parts can cause the trouble: Transfer Roller Pressure Solenoid (SL2) Transfer Roller Pressure Position Detection Sensor (PC7) Engine Board (PWB-A)
Solution 2:
The problem come from the fuser. You have to replace it.EPL-N3000: C13S053017BA Aculaser C1100: 2090471Aculaser C1900: 2077368
Solution 1:
Lift the scanner cover using the plastic tabs, located on the left and right side of the machine until it locks securely into the open position.Slide the print head to the middle.Check for any pieces of paper or staple , paper clip...
Solution 2:
Lift the scanner cover using the plastic tabs, located on the left and right side of the machine until it locks securely into the open position.Slide the print head over to the right side under the cover to make sure you clean the entire encoder strip. With the lint free cloth, firmly grab the encoder strip on both sides and rub the cloth down the strip from one end to the other (left to right then right to left) at least three times.Solution 3:
the encoder strip which gives the printhead the position is out of place. You have to open the printer and reinsert the strip:
General Printer Error 0x61011be5.
Appears on these printers: D7560, C309A, C5390, C6380, ...
Genraly it's a carriage jam or a printhead issue.
Solution 1: Do a reset of the printer to factory default settings
Verify that the unit is switched on. Disconnect the power cable from All-in-One and also from wall outlet.Wait a minute.Plug in the power cable to the printer and also to wall outlet.Unplug the power cable from the printer (with the printer powered on) and wait for 20 seconds.Then, press and hold "#" and "6" while plugging in the power cord.Release the buttons after connect power cord.
Solution 2:
Open the printer and wait for the carriage to slide overRemove the ink cartridges from the print head.With a cotton swabs dipped in hot water, clean gently the print head and each ink cartridge, until there is no ink residue coming off on the cotton swab.Once all is dry, replace the cartridgesDo a print test.If the error is still here: there are two possibilities:One of the ink cartridges is defective and causing the error
The print head will need to be replaced. (CN642A)
Genuine HP CN643A - CD868-30001 printhead for HP 920 - 920XL:
Solution 1:
Unplug power supply and plug back in.
Solution 2:
Check for no pieces of paper, no littles objetcs in the printers.
Solution 3:
Carefully clean the encoder strip. It's located behind the carriage that runs all the way from right to left
Solution 1:
Disconnect the power cable from the printer.Wait 1 hour.Connect the power cable
Solution 2:
Check and Clean Head contact pin condition of the carriage unitCheck Cable connection especially the carriage FFC
Solution 3:
Solution 4:
Replace the power supply unit.
Solution 5:
Copyright © 2010 Fix Your Printer By Self | Powered By Blogger