It is basically a modified reset procedure for Canon MP460.
1. Disconnect the power cable.
2. Hold down On/Off button.
3. Reconnect the power cable.
4. With the power button still down, press the Stop/Reset button twice.
5. Release the On/Off button.
6. The printer is now in factory mode (wait until idle is displayed)
7. Press the right arrow button (next to the OK button) repeatedly until Shipping Mode 3 is displayed.
8. Press the OK Button
9. Wait until “Without Cleaning” is displayed and then presss the Stop/Reset button once.
10. A test page should print.
11. Open the cover. (the cartridges should position themselves at the far left – the cartridge removal location)
12. Disconnect the power cable.
13. Remove both cartridges.
14. Close the cover.
15. Reconnect the power cable.
16. Press the On/Off button.
17. Wait until a Replace Cartridges message is displayed. Now insert the cartridges.
18. Wait until the printer is operating in its normal mode. The display shows the normal start menu (ie: Copy).
to view the Ink level
* Check by going to printer ->properties -> maintenance -> view printer status
0 komentar:
Posting Komentar