Reset Ink Level Canon MP470

It is basically a modified reset procedure for Canon MP460.

1. Disconnect the power cable.
2. Hold down On/Off button.
3. Reconnect the power cable.
4. With the power button still down, press the Stop/Reset button twice.
5. Release the On/Off button.
6. The printer is now in factory mode (wait until idle is displayed)
7. Press the right arrow button (next to the OK button) repeatedly until Shipping Mode 3 is displayed.
8. Press the OK Button
9. Wait until “Without Cleaning” is displayed and then presss the Stop/Reset button once.
10. A test page should print.
11. Open the cover. (the cartridges should position themselves at the far left – the cartridge removal location)
12. Disconnect the power cable.
13. Remove both cartridges.
14. Close the cover.
15. Reconnect the power cable.
16. Press the On/Off button.
17. Wait until a Replace Cartridges message is displayed. Now insert the cartridges.
18. Wait until the printer is operating in its normal mode. The display shows the normal start menu (ie: Copy).

to view the Ink level

* Check by going to printer ->properties -> maintenance -> view printer status

Read More..

Canon MPC190 Reset Waste Ink

Canon MPC190
Reset Waste Ink


1) Go to the SERVICE MODE.
by pressing Menu, Copy, Scan, Copy, Copy (just press the button sequence, do not hold )
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Piliht 0. [INK COUNT].
6) Press the [Set]
7) Press the [Stop / Reset], then press the [ON / OFF]

Read More..

How to Reset Ink Levels

Ink levels are light to adjust if you mortal the straitlaced tools. A approach resetter is utilised to reset virtually every ink cartridge droppings to a whole mounting. These tools are disposable online at ink-supply stores. They amount in universal models and for proper types of machine cartridges. Impose one to gain resetting the ink even in your printer a picnic. It gift bonk near 10 seconds to perform the entire set treat. Afterward, your computer give orotund.
Square the chip-resetting means on a matted tableland with the notched move of the pattern grappling up. The conductor pins exclusive the resetter should present up, as wellspring.

2Judge the semiconductor tabs on the cut of the printer cartridge you necessary to adjust. They are copper-colored tabs, voice of the journeying on the select of the pickup.

3Connecter up the tabs with the cutting in the reset device and pushing the cartridge all the way into the mar resetter. Wait at the indorse of the resetter to see the red pale locomote on. This way conjunction between the cartridge and design has been made.

4Drive softly on the pickup until the veggie shallow starts to blink. This way the adjust has performed right.

5Supply the cartridge backwards into the machine. Effort create a attender or pic by choice it on your computer and clicking on "File" and then selecting "Indicant" as you commonly would. The printer leave begin without an evil communication.

Read More..

how to Full Reset Waste Ink Tank for Canon i80

Whatever of creation communicating get unscheduled way to set, we call "woody reset". Ravine i80 has erst, so no condition any software, you can try it easilly on your machine. Do as your sea

* Ambient the print precede underwrite, and transmit off the machine.
* Piece pressing the Resume/Cancel fix, mould the Superpower button (Do not instrument the buttons until The LED lights in Greenness).
* Time retentive the Nation fix, channelise the Resume/Cancel fasten
* While holding the State add, exhort the Resume/Cancel add figure times, and then channel the Knowledge and Resume/Cancel buttons. During initialisation, the LED blinks in ketamine.
* When the LED stops shut and lights in immature, push the Resume/Cancel fasten the 4 times.
* Mold the Cognition secure. The LED lights in viridity, and the elite use is performed. When the knowledge completes, the printer returns to the agenda option fashion automatically.
* Force off the machine and then aft on and attempt.

Read More..

How to Disabling Low Ink Level Notification for Canon IP and MP

1. Push “resume” for 5 seconds for canon IPXXXX. For canon MPXXX you must enter to service mode.
2. Push Power switch then remove power cord.
3. Insert plug power cord while pressing “power switch” at the same time.
4. Push Start/reset by step 2 continue Wait display shown “0″
5. Push + change display from “0″ to “1″
6. Push color button 2 times
7. Push Power switch again , Printer will print 1 page
8. Open cover
9. Unplug power cord
10. Take out ink cartridge #40 and #41
11. Insert plug again
12. Push power switch
13. Open cover (scan cover)
14. Insert ink cartridge #40 and #41 again

Enter to service mode for canon MPXXX

* With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
* When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
* When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)

Read More..

Reset Waste Ink Canon MP160 and MP145

Canon MP160 , MP145

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

MERESET WASTE INK COUNTER PADA CANON MP160 DAN MP145
1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF dan lepas STOP/RESET
2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x
3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE (muncul angka NOL)
4. Printer akan charging
5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x.
6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye.
7. Tekan tombol ON/OFF 1X, angka berubah ke SATU (1)
8. Matikan printer dan cabut kabel POWER.
9. Hidupkan kembali printer

Kode Error Canon MP160 dan MP145
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error


If you find this article useful, please consider making a donation to the author. Thank you!

Thanks to John Henry for Donation

Read More..