Reset Protection Counter for Epson 1390

Please follow the steps below to reset the protection counter effectively.

1. If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
2. Make sure you printer is ON and connected to your computer.
3. Run “Start.bat” file.
This program will set your computer date to 4 Oct 2007.
4. Click “Accept” button.
5. Click “Particular adjustment mode” button.
6. Select on “Waste ink pad counter” and click “OK” button.
7. Click on “Initialization” button and the program will reset the protection counter.
8. Click “Finish” button.
9. Change your computer’s date back when it prompted.
10. Reactivate your anti virus if any.
download here

Read More..

how to Full Reset Waste Ink Tank for Canon i80

Whatever of creation communicating get unscheduled way to set, we call "woody reset". Ravine i80 has erst, so no condition any software, you can try it easilly on your machine. Do as your sea

* Ambient the print precede underwrite, and transmit off the machine.
* Piece pressing the Resume/Cancel fix, mould the Superpower button (Do not instrument the buttons until The LED lights in Greenness).
* Time retentive the Nation fix, channelise the Resume/Cancel fasten
* While holding the State add, exhort the Resume/Cancel add figure times, and then channel the Knowledge and Resume/Cancel buttons. During initialisation, the LED blinks in ketamine.
* When the LED stops shut and lights in immature, push the Resume/Cancel fasten the 4 times.
* Mold the Cognition secure. The LED lights in viridity, and the elite use is performed. When the knowledge completes, the printer returns to the agenda option fashion automatically.
* Force off the machine and then aft on and attempt.

Read More..

How to Disabling Low Ink Level Notification for Canon IP and MP

1. Push “resume” for 5 seconds for canon IPXXXX. For canon MPXXX you must enter to service mode.
2. Push Power switch then remove power cord.
3. Insert plug power cord while pressing “power switch” at the same time.
4. Push Start/reset by step 2 continue Wait display shown “0″
5. Push + change display from “0″ to “1″
6. Push color button 2 times
7. Push Power switch again , Printer will print 1 page
8. Open cover
9. Unplug power cord
10. Take out ink cartridge #40 and #41
11. Insert plug again
12. Push power switch
13. Open cover (scan cover)
14. Insert ink cartridge #40 and #41 again

Enter to service mode for canon MPXXX

* With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
* When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
* When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)

Read More..